Support

LSI 2308 Firmware P16 (for FreeNAS)

Download LSI 2308_P16.zip from https://download.asrock.com/TSD/LSI 2308_P16.zip

  1. Unzip “LSI 2308 FW update” to bootable USB Drive.
    You can follow below link to build a bootable USB drive. http://rufus.akeo.ie/
  2. Boot to DOS environment.
  3. Execute readaddr.bat (save sas address and create info.txt)
    example:
  4. Execute start.bat to update LSI2308 FW.
  5. Restart and press Ctrl+C into LSI RAID ROM.
    You can check the FW revision, SAS address and compare with info.txt(stpe1)
  6. If SAS address have been changed please type command (in DOS)“sas2flsh.exe -o -sasadd XXXXXXXXXXXXXXXX” Your SAS address
  7. Restart and check SAS address
  8. Finish
© 2024 ASRock Rack Inc. All rights reserved. | Information published on ASRockRack.com is subject to change without notice.| Terms of Use Notice | Privacy Policy